OEM Xenon Headlight Ballast Control Unit

More than 160 Original HID Lamp Ballasts for 35 car makes

Original Xenon Headlight Ballast Control Unit & LED Headlight Modules

With the 2019 Lighting Catalogue, Toplight Italia proposes an important range expansion
for Original, or Factory Xenon Headlight Ballast (or OEM HID control units), also introducing LED modules.
As per tradition, our Xenon headlight control units and LED headlight modules are produced for a plug and play installation – no modification to original car parts is necessary during installation.

The range counts both adaptable and regenerated products:

COPY codes are easily identified by the precode 60
REFURBISHED codes are instead preceded by the precode 61

Furthermore, Toplight control units, where not specified with an L (left) or R (right) at the end of the code, can be used for both the right and left headlights of the car.

The xenon ballasts and LED modules are already present on our online configurator, searchable both for applications, for the car Original Equipment (OE) code and for the original equipment manufacturer (OEM) code.

OEM Ballast Quality Control Procedure

Check #1. Ballast circuit board check before production. Defective raw material is picked up.
Check #2. After production, the ballast is checked a 2nd time. Defective ballasts are discarded.
Check #3. Transfer of the ballast to the aging room for a 2-hour test.
Check #4. After 2-hour aging test, 10% ballasts in this batch will be send to the lab for current voltage and other specifications test.
If step 4 is OK, then the goods will be sent to warehouse, the warehouse QC team will check it to make sure the production line provide the OK ballasts. Then the ballasts will be received by
the factory’s own warehouse.
Check #5: Final Check. The warehouse QC team will test the ballasts before sending them to customers.

Genuine refurbished Ballast Quality Control Procedure

Check #1. A first test is made to the whole batch ballasts when received, defective ballasts are
discarded. Good ballasts are selected for the refurbish step.
Check #2. Once the refurbish job has been done, a second functional test take place. If positive, ballast will be stocked
Check #3. Final Test before shipment. If positive, a sticker with year and month on the products is pasted on the ballast.

Original Xenon Ballast Control Units and LED Headlight Modules are available for the folllowing Manufacturers: